Abstract
This article investigates the issue of neuroadaptive tracking control for a family of unknown multi-input multi-output (MIMO) nonlinear uncertain systems subject to extreme actuation failures. Different from most existing methods that are built upon partial loss of actuation effectiveness, here, in this article, we explicitly consider the situation that some actuators at some particular channel completely fail to work, an issue that has not been well addressed. By integrating the neural network approximation technique with two error transformations, a neuroadaptive fault-tolerant control strategy is developed with two attractive features: 1) it is capable of coping with the scenario that some of the actuators suffer from extreme actuation faults without the need for fault detection and diagnosis (FDD)/fault detection and isolation (FDI) or actuator switching and 2) the tracking error is forced to converge to a prescribed residual (symmetric or asymmetric) boundary at a preassignable decay mode within a prechosen finite settling time despite actuator failures and external disturbances. Numerical simulation studies confirm the effectiveness and benefits of the presented control approach.
| Original language | English |
|---|---|
| Article number | 8930082 |
| Pages (from-to) | 5427-5436 |
| Number of pages | 10 |
| Journal | IEEE Transactions on Systems, Man, and Cybernetics: Systems |
| Volume | 51 |
| Issue number | 9 |
| DOIs | |
| Publication status | Published - Sept 2021 |
| Externally published | Yes |
Bibliographical note
This article was recommended by Associate Editor M. Kothare.Funding
This work was supported in part by the National Natural Science Foundation of China under Grant 61860206008, Grant 61773081, Grant 61933012, and Grant 61833013, in part by the Graduate Scientific Research and Innovation Foundation of Chongqing under Grant CYB19057, and in part by the China Scholarship Council.
Keywords
- Actuator redundancy
- error transformation
- neuroadaptive fault-tolerant control
- pregiven tracking performance