Skip to main navigation Skip to search Skip to main content

Synergistic improvement of strength and toughness in FeCoCrNiCu high-entropy alloy/copper composites

  • Gaojing SUN
  • , Ming XIA
  • , Kai LIU
  • , Pengfei WU*
  • *Corresponding author for this work

Research output: Journal Publications › Journal Article (refereed) › peer-review

Abstract

To address the inherent strength-ductility trade-off in FeCoCrNiCu high-entropy alloy (HEA)-reinforced copper matrix composites, bulk composites were fabricated by three-dimensional vibratory mixing followed by spark plasma sintering (SPS) at 750 °C, 850 °C, and 950 °C. The influence of sintering temperature on microstructural evolution and the resulting strength and ductility was systematically investigated, supported by complementary atomic-scale molecular dynamics (MD) simulations. Microstructural characterization and mechanical testing revealed that sintering temperature effectively modulates the densification level, interfacial metallurgical bonding quality, and key microstructural features of the composites. The contributions from load transfer strengthening, dislocation strengthening, and grain boundary strengthening were quantitatively evaluated, uncovering a systematic evolution in the relative dominance of each strengthening mechanism with increasing sintering temperature. At the optimal sintering condition of 950 °C, the composite exhibited the highest relative density and interfacial bonding strength, with a yield strength of 157.17 MPa, ultimate tensile strength of 306.37 MPa, and elongation to fracture of 21.15%. MD simulations further elucidated the temperature-dependent behaviors of interfacial atomic interdiffusion, interfacial structural evolution, and dislocation multiplication/entanglement under tensile loading. This work provides a multi-scale theoretical and experimental basis for the microstructural design and process optimization of copper matrix composites with simultaneously improved strength and ductility.
Original languageEnglish
Article number150425
JournalMaterials Science and Engineering: A
Volume967
Early online date16 May 2026
DOIs
Publication statusPublished - Aug 2026
Externally publishedYes

Bibliographical note

Publisher Copyright:
© 2026 Elsevier B.V.

Funding

The authors would like to acknowledge Zijun Ren (Xi'an Jiaotong University Instrument Analysis Center) and Hefei advanced computing center. This work was supported by the Jiangsu Provincial Outstanding Postdoctoral Program (grant number 2024ZB665).

Keywords

  • Copper matrix composites
  • High-entropy alloy
  • Mechanical properties
  • Microstructure evolution
  • Spark plasma sintering

Fingerprint

Dive into the research topics of 'Synergistic improvement of strength and toughness in FeCoCrNiCu high-entropy alloy/copper composites'. Together they form a unique fingerprint.

Cite this